Wireless Spectrum Intelligence
WiFi Analyzer & Channel Optimizer
Analyze Wi-Fi signal strength (dBm), channel frequency overlap, and identify the least congested channels to eliminate wireless interference.
Signal Strength (RSSI)
-48 dBm
Excellent (92% Quality)Active Channel
Channel 6
Bandwidth: 20/40 MHzChannel Overlap
1 Neighbor
Low CongestionStandard
Wi-Fi 6 (ax)
OFDMA & 1024-QAMAI Recommended Channel
Channel 1 or 11 (Channel 6 is moderately crowded)
Configuring your router to this channel will reduce co-channel packet collisions by up to 64%.
2.4 GHz Channel Interference & Spectrum Analyzer
Live ScanActive AP (Ch 6)Clean (Ch 1)Clean (Ch 11)Bleed Collision (Ch 4)
BAND: 2.4GHzCHANNEL WIDTH: 20 MHzNOISE FLOOR: -96 dBm
Y: Signal RSSI (dBm) • X: Channel Frequency-30 dBm
-50 dBm
-70 dBm
-90 dBm
★ Active Spectrum (Ch 6) • -48 dBm
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
Ch 7
Ch 8
Ch 9
Ch 10
Ch 11
Ch 12
Ch 13
2401 MHz★ Recommended Non-Overlapping Channels: 1, 6, 11 (25 MHz Separation)2483 MHz
Wireless Channel Allocation & Spectrum Planning
| Channel / Center Frequency | Channel Bandwidth | Spectrum Status | Deployment Recommendation |
|---|---|---|---|
| Channel 1 (2412 MHz) | 20 MHz | ✔ Standard Non-Overlapping | Recommended Primary Channel |
| Channel 6 (2437 MHz) | 20 MHz | ✔ Standard Non-Overlapping | Standard Center Channel |
| Channel 11 (2462 MHz) | 20 MHz | ✔ Standard Non-Overlapping | Recommended Secondary Channel |
| Channel 4 (2427 MHz) | 20 MHz | ⚠ Severe Co-Channel Overlap | Interferes with Ch 1 & 6 (Avoid) |
Knowledge Base & FAQ
WiFi Optimization & Interference FAQ
How to configure your home or office router for lowest latency and peak throughput.
In the 2.4GHz Wi-Fi band, each channel is 20MHz wide, but adjacent channel centers are separated by only 5MHz. Consequently, channels like 2, 3, 4, and 5 bleed into channels 1 and 6, generating co-channel interference and packet collisions. Channels 1, 6, and 11 are spaced exactly 25MHz apart, allowing them to operate simultaneously without overlapping.